Steel Earth Anchors / Ground Anchors are installed at a slant, inline with the attached wire and perpendicular to the end post. This way the helix plate can catch. If it is too difficult to turn the anchor into the ground, a hole is dug to a depth of approximately 1/2 the length of the anchor. Then turn the anchor into the ground by hand, using a rod, crow bar, or length of pipe for leverage. After the earth anchor is installed full depth, earth is repacked, six inches at a time.Made of high quality steel, simply screw the metal anchor into the ground and secure your ropes/wires to the anchor eye.
Anchor Material : Q235 Carbon steel .
Treatment : powder coated or HDG .
Metal Screw anchor size :
pole diameter whole length disk diameter disk thickness
3/4''(18mm) 36''(914mm) 8''(200mm) 3mm
3/4''(18mm) 48''(1219mm) 8''(200mm) 3mm
14mm 15''(381mm) 75mm 4mm
14mm 30''(762mm) 75mm 4mm
16mm 15''(381mm) 100mm 2mm
12mm 800mm 140mm 4mm
14mm 1000mm 180mm 4mm
Applications include bridges , cable cars and cable railways , as well as maintaining excavations against ground instability . The anchors provide an effective alternative to large gravity or stabilisation structures.
Product Categories : Ground Anchors/Earth Auger